Turn Signal and Lane Change Indicator; Headlamp High/Low Beam Changer- Page 103

2-36

Turn Signal and Lane Change Indicator

The turn signal has the following positions: two upward
(for right) and two downward (for left). These positions
allow you to signal a turn or a lane change.

To signal a turn, move the lever all the way up or 
down. When the turn is finished, the lever will 
return automatically.

An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

If the arrow flashes faster than normal as you signal a
turn or a lane change, a signal bulb may be burned out
and other drivers won’t see your turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned

-

out bulbs and then check

the fuse (see “Fuses and Circuit Breakers” in the Index).

A chime will sound if you leave your turn signal on for
more than 3/4 mile (1.2 km).

Headlamp High/Low Beam Changer

To change your headlamps from low beams to high
beams, or high to low, pull the multifunction lever all
the way toward you. Then release it.

When the high beams 
are on, this indicator light
located on the instrument
panel cluster will also be on.