Rearview Mirror Reading Lamps; Dome Lamp (If Equipped)- Page 113

2-46

You may enable or disable the perimeter lighting feature
when the driver performs the following sequence with
the engine not running, the doors closed:

1. Turn the ignition to RUN.

2. Close all the doors.

3. Apply your brakes.

4. Press and hold the power door lock switch. 

While holding the door lock switch press and 
release the remote alarm button on the remote
keyless entry transmitter.

This will initialize the customization mode. While in the
customization mode, the feature will sound the number
of chimes corresponding to the current mode: In Mode
1, one chime means the feature is disabled. In Mode 2,
two chimes signal that the perimeter lighting feature is
enabled. Each additional press will advance the mode by
one, starting from the current mode. During this
procedure, the feature will sound the number of chimes
corresponding to the mode. When the lock switch is
released, the vehicle will remain in the last mode.

Disconnecting the vehicle’s battery for up to a year will
not change the programmed operation of this feature.

Rearview Mirror Reading Lamps

The reading lamps are located on the underside of the
rearview mirror.

Use the switch next to each lamp to turn them on 
and off.

Dome Lamp (If Equipped)

The dome lamp will come on when you open the doors.