Rear-Door Child Security Locks; Mode 4:- Page 73

2-6

Mode 4: Automatic all

-

door lock when the transaxle is

shifted out of PARK (P). Automatic driver’s door only
unlock when the transaxle is shifted into PARK (P).
Automatic door relock when any door is unlocked,
opened and then all doors are closed again while the
vehicle is not in PARK (P) or NEUTRAL (N) and the
driver’s foot is on the brake pedal.

The programmable automatic power door locks
operating mode will be changed when the driver
performs the following:

1. Turn the ignition key to RUN.

2. Close all of the doors.

3. Apply your brakes.

4. Press and hold the power door lock switch. While

holding the door lock switch, move the shift lever
out of and back into PARK (P).

After an initial transaxle cycle, each additional cycle
will advance the operating mode by one, starting from
the current operating mode. During this procedure, the
automatic door lock and unlock functions will operate as
defined by each mode listed previously, providing the
driver with feedback of the current operating mode. If
cycled beyond Mode 4, the vehicle will enter operating
Mode 1. When the door lock switch is released, the
vehicle will remain in the most recent operating mode.

Disconnecting the vehicle’s battery for up to a year 
will not change the last programmed mode of the
programmable automatic power door locks.

Rear-Door Child Security Locks

Your vehicle is equipped
with rear

-

door child

security locks that help
prevent passengers from
opening the rear doors 
of your vehicle from 
the inside. To use one 
of these locks:

1. Open one of the rear doors.

2. On the inside of the rear door will be a lock. Insert

your key into this lock and turn it upward. This will
engage the safety lock. To disengage the feature, turn
the lock downward.

3. Close the door.

4. Do the same thing to the other rear door lock.