Front Parking and Turn Signal Lamp; Center High-Mounted Stoplamp- Page 280

6-37

Once the horizontal aim is adjusted, then adjust the
vertical aim.

1. Turn the horizontal aiming screw until the indicator

is lined up with zero.

2. Turn the vertical aiming screw until the level bubble

is lined up with zero.

Front Parking and Turn Signal Lamp

1. Remove the headlamp assembly. Refer to the

removal procedure earlier in this section.

2. Remove the rubber bulb access cover.

3. Twist the sidemarker lamp socket counterclockwise

and pull from the headlamp assembly.

4. Holding the base of the bulb, pull the bulb from 

the socket.

5. Push the new bulb into the socket.

6. Reverse these steps to reinstall the lamp assembly.

Center High-Mounted Stoplamp

1. Open the trunk.

2. Reach through the access opening in the trunk.