Lockout Protection Feature; Leaving Your Vehicle; Remote Keyless Entry- Page 74

2000 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Section 1 Seats and Restraint Systems
Section 2 Features and Controls
Section 3 Comfort Controls and Audio Systems
Section 4 Your Driving and the Road
Section 6 Service and Appearance Care
Section 7 Maintenance Schedule
Section 8 Customer Assistance Information
background image

2-7

The rear doors of your vehicle cannot be opened from
the inside when this feature is in use. If you want to
open the rear door when the security lock is on, unlock
the door from the inside and then open the door from 
the outside.

Lockout Protection Feature

The feature works by disabling the power door locks
when a key is in the ignition and any door is open.

You may override the lockout protection feature by
holding the power door lock switch in the lock position
for more than three seconds while the key is in the
ignition and any door is open.

Remember, this feature can’t guarantee that you’ll never
be locked out of your vehicle. If you use the manual
door lock or if you don’t leave the key in the ignition,
you could still lock your keys inside your vehicle.
Always remember to take your keys with you.

Leaving Your Vehicle

If you are leaving the vehicle, take your keys, open your
door and set the locks from inside. Then get out and
close the door. (Also see “Delayed Locking” in this
section for more information.)

Remote Keyless Entry

If your vehicle has this feature, you can lock and unlock
your doors or unlock your trunk from about 3 feet (1 m)
up to 30 feet (9 m) away using the remote keyless entry
transmitter supplied with your vehicle.

Your remote keyless entry system operates on a radio
frequency subject to Federal Communications
Commission (FCC) Rules and with Industry Canada.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, 
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

This device complies with RSS

-

210 of Industry Canada.

Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation of 
the device.

Changes or modifications to this system by other than 
an authorized service facility could void authorization to
use this equipment.