Front Parking and Turn Signal Lamps; Center High-Mounted Stoplamp- Page 293

6-42

Once the horizontal aim is adjusted, then adjust the
vertical aim.

1. Turn the horizontal aiming screw until the indicator

is lined up with zero.

2. Turn the vertical aiming screw until the level bubble

is lined up with zero.

Front Parking and Turn Signal Lamps

1. Remove the headlamp assembly. Refer to the

removal procedure earlier in this section.

2. Remove the rubber bulb access cover.

3. Twist the sidemarker lamp socket counterclockwise

and pull it from the headlamp assembly.

4. Holding the base of the bulb, pull the old bulb from

the socket.

5. Push the new bulb into the socket.

6. Reverse Steps 1 through 3 to reinstall the 

lamp assembly.

Center High-Mounted Stoplamp

1. Open the trunk.

2. Reach through the access opening in the trunk.