Trunk Lid Applique- Page 295

6-44

3. Squeeze the tab on the socket and turn the 

socket counterclockwise.

4. Pull out the socket.

5. Pull the old bulb out of the socket. (There are 

two bulbs on each taillamp.)

6. Push in a new bulb.

7. Reverse these steps to reinstall the lamp assembly.

Trunk Lid Applique

1. Open the trunk lid halfway.

2. Remove the wing nuts (A) from the studs on the

applique. (There are eight wing nuts. Pliers may be
required to remove them.)

3. Remove the applique from the trunk lid.

4. Turn the sockets (B) counterclockwise.

5. Pull the bulb out of the socket.

6. Push in the new bulb.

7. Reinstall the socket in the housing and 

turn clockwise.

8. Connect the applique to the lid.

9. Reconnect the wing nuts to the studs on the

applique and hand

-

tighten.

10. Close the trunk lid.