Vehicle Care- Page 300

2020 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
Vehicle Care
background image

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada-13557849) -

2020 - CRC - 6/25/19

Vehicle Care

299

2. Remove the air only hose (11)

and the power plug (10) from
the bottom of the compressor.

3. Place the compressor on the

ground near the flat tire.

Make sure the tire valve stem
is positioned close to the
ground so the hose will
reach it.

4. Remove the valve stem cap

from the flat tire by turning it
counterclockwise.

5. Attach the air only hose (11) to

the tire valve stem by turning it
clockwise until tight.

6. Plug the power plug (10) into

the accessory power outlet in
the vehicle. Unplug all items
from other accessory power
outlets. See

Power Outlets

0

103

.

If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.

If the vehicle only has a
cigarette lighter, use the
cigarette lighter.

Do not pinch the power plug
cord in the door or window.

7. Start the vehicle. The vehicle

must be running while using
the air compressor.

8. Press the on/off button (8) to

turn the tire sealant and
compressor kit on.

The compressor will inflate the
tire with air only.

9. Inflate the tire to the

recommended inflation
pressure using the pressure
gauge (5). The recommended
inflation pressure can be found
on the Tire and Loading
Information label. See

Tire

Pressure

0

272

.

The pressure gauge (5) may
read higher than the actual tire
pressure while the compressor
is on. Turn the compressor off
to get an accurate pressure
reading. The compressor may
be turned on/off until the
correct pressure is reached.

Caution

If the recommended pressure
cannot be reached after
approximately 25 minutes, the
vehicle should not be driven
farther. The tire is too severely
damaged and the tire sealant and
compressor kit cannot inflate the
tire. Remove the power plug from
the accessory power outlet and
unscrew the inflating hose from
the tire valve. See

Roadside

Assistance Program

0

344

.

10. Press the on/off button (8) to

turn the tire sealant and
compressor kit off.

Be careful while handling the
compressor as it could be
warm after usage.

11. Unplug the power plug (10)

from the accessory power
outlet in the vehicle.

12. Turn the air only hose (11)

counterclockwise to remove it
from the tire valve stem.

Detailed Information for 2020 Buick Regal Owner Manual

Lists of information found in 2020 Buick Regal Owner Manual - Page 300

  • 2. Remove the air only hose (11) and the power plug (10) from the bottom of the compressor.
  • 3. Place the compressor on the ground near the flat tire.
  • 4. Remove the valve stem cap from the flat tire by turning it counterclockwise.
  • 5. Attach the air only hose (11) to the tire valve stem by turning it clockwise until tight.
  • 6. Plug the power plug (10) into the accessory power outlet in the vehicle.
  • 7. Start the vehicle.
  • 8. Press the on/off button (8) to turn the tire sealant and compressor kit on.
  • 9. Inflate the tire to the recommended inflation pressure using the pressure gauge (5).
  • 11. Unplug the power plug (10) from the accessory power outlet in the vehicle.
  • 12. Turn the air only hose (11) counterclockwise to remove it from the tire valve stem.