REMOTE START DISABLED
If your vehicle has the remote start feature, this
message displays if a remote start attempt is
unsuccessful. This may be caused if any of the
following conditions are true when a remote
start attempt is made:
•
The remote start system is disabled through
the DIC.
•
The key is in the ignition.
•
The hood or the doors are not closed.
•
There is an emission control system
malfunction.
•
The engine coolant temperature is too high.
•
The oil pressure is low.
•
The hazard warning flashers are turned on.
•
The maximum number of remote starts
or remote start attempts between ignition
cycles has been reached.
•
The content theft-deterrent alarm is on while
attempting to remote start the vehicle.
See “REMOTE START” under
Personalization (Uplevel Only) on page 249
and
“Remote Vehicle Start” under
Entry System Operation on page 99
for more
information.
REMOTE START ON
If your vehicle has the remote start feature, this
message displays when a remote start is initiated.
See “Remote Vehicle Start” under
Entry System Operation on page 99
for more
information.
RIGHT FRONT TURN LAMP OUT
This message displays when the right front turn
signal bulb needs to be replaced. See
and Sidemarker Lamps on page 443
.
This message displays while the ignition is in RUN.
Press any of the DIC buttons to acknowledge this
message and to clear it from the screen.
This message continues to display for two seconds
if it has not been acknowledged when the engine
is turned off. It also re-displays for two seconds if
the message has been acknowledged, but the
condition still exists when the engine is turned off.
If the condition still exists, the message re-appears
when the engine is turned on.
242