CHECK YOUR TRUCK BEFORE STARTING WORK- Page 16

Daily Safety Check

29   Daily Safety Check

CHECK YOUR TRUCK BEFORE STARTING WORK

You must make sure your truck is safe to use.

1. Walk around your truck and check it over.

• Clean the safety shields and keep them clear.

• Check to make sure the battery is charged, water level 

is OK and vent caps are in place.  Don't use an open 
flame to check the battery.

• Make certain the battery retainer and side cover are 

properly installed.

• See that all wheels are in good condition.

• Make sure the flashing light is working.

• Check that both forks are secure and not bent, cracked

or badly worn.

• Inspect all lift chains for damage.

• Look under the truck for signs of hydraulic leaks.

• Adjust the operator seat to the most comfortable position.

Turn the rear view mirror to the best viewing position.

• Turn the key to TEST.  See that the alarm and all indicator

lights are working.  Try the horn.

• Make sure the power disconnect works.

2. Test drive your truck in an uncongested area.

• Try all the hydraulic functions.

• Check that the steering is easy and smooth.

• Drive the truck slowly in both directions.

• Drive through the full speed range in both forward

and reverse.

• Check braking and plugging distances in forward

and reverse.  Load size and floor conditions can affect 
these distances.

• Know the distance it takes to stop before you start 

working.  If the braking distance is too long to stop 
safely, don't drive the truck.

• Check wire guidance operation.

If anything doesn't look or feel right, don't drive the truck.
Report the problem.

You can get checklist forms from your Crown dealer
(part no. OF-3772).  Used properly, this checklist can alert
service people to needed repairs.

Daily Safety Check   30