13 Hard ; Hard Cab; Traveling & Plugging 30- Page 14

13 Hard 

Cab

Hard Cab

DOOR 

OPERATION

To enter the hard cab, pull the handle to open the 
door. Climb aboard your truck and close the door 
before you start the vehicle.

To exit, pull the lever and push the door open.

Close the doors after leaving the hard cab.

WINDOW OPERATION

Squeeze the door window latch then slide the window 
open or closed.

REAR WINDOW OPERATION

Your rear window has three positions closed, open 
and vented.

• To open: lift the window handle to the upward  

position and the window will open with a slight 
push. Never drive the truck with the rear window 
fully open.

• For ventilation: lift the handle, open the window a 

small amount, and lock it in place.  

• To close: lift the handle, pull the window closed and 

lock it in place.

Traveling & Plugging   30

OPTIONAL TRAVEL DIRECTION AND SPEED CONTROL PEDAL

Push down on the right accelerator pedal to travel 
forks fi rst.
Push down on the left accelerator pedal to travel 
power unit fi rst (forks trailing).

The accelerator pedal(s) control travel speed. The 
farther you push it down, the faster the truck will go.

If the truck will not move, check the message display.

• RETURN TO NEUTRAL means you must release both 

accelerator pedals.

• DEPRESS BRAKE PEDAL means the brake pedal must 

be depressed fi rmly to release the parking brake.

If the seat belt light (     ) is fl ashing, you must fasten 
or unfasten and refasten your seat belt to continue 
traveling.

Continued next page...

Know the Hazards

SLOW DOWN FOR SPILLS OR WET FLOORS

Powder or liquid spills can cause slippery floors. 
Slow down or you could lose control of steering and 
braking. Be careful and allow for a longer stopping 
distance.

Don't run over objects on the floor.

POWER UNIT SWING

Be careful turning while traveling forks fi rst. The 
power unit will swing wide in the opposite direction. 
Make sure you have clearance, and watch out for 
people in the area

Slow down when making turns.