23 Display
Display
BATTERY CHARGE STATUS
The green bars show how much charge is left.
Have the battery changed or recharged if the
yellow light is fl ashing.
MESSAGE DISPLAY
Displays truck information such as: hours of
operation, event codes along with instructions,
battery charge and other data.
BATTERY RETAINER LIGHT (OPTION)
A red light will come on if the battery retainer
is not properly installed. (BATTERY
GATE OPEN displayed)
SERVICE & OPTION BUTTONS
See Service Manual for instructions.
PERFORMANCE SETTING
Indicates the level that your company has
programmed this truck to operate at.
EVENT LIGHT (OPERATOR CORRECTABLE)
A yellow light will come on when there is a
detected event which the operator can correct.
See the message display for instructions.
SERVICE LIGHT (SERVICE REQUIRED)
A yellow light will come on when there is a
detected event which requires service. Contact
your supervisor or service department.
A red light will co
is not pro
G
SERVICE & O
Capacity Plate 20
Know the Hazards
TRUCK WEIGHT
Dockboards, elevators and some fl oors have limited
capacity. Check your capacity plate for the weight
of your truck. Remember to add the weight of the
load you have on the forks. Make certain you use the
correct units of measure.
TRUCK TYPE
Some truck types are not permitted in areas where
there are fi re hazards. Watch for marked areas. For
example: You must not drive a type E or ES truck into
an area restricted to EE or EX trucks
ATTACHMENT DATA
If an attachment on your truck does not match the
information given on your capacity plate, don't operate
your truck. Your capacity plate may be wrong. Report
the problem to your supervisor.
BEFORE AUGUST 2017: READING YOUR CAPACITY PLATE
Capacity may be reduced as lift height increases.
For example: On the sample
plate, 1950 kg (4295 lb) can be lifted to 3300mm (130 in). But above 3300 (130), to
4825 (190), capacity is reduced from 1950 (4295) to 1850 (4075).
Capacity is reduced as load center increases.
For example: 1950 kg (4295 lb) can
be lifted if the load center is 600mm (24 in). But if the load center is increased to 760mm
(30), capacity is reduced from 1950 (4295) to 1800 (3965).
Caution:
You may not increase capacity
if load center is less than shown on
your capacity plate.
Note:
ANSI/ITSDF B56.1 requires that
all data be shown first in Metric units
and then USA units.
Capacity with Mast
Vertical
Units of measure,
kg/mm
(lb/in)
Capacity
8346-
A
1850
4825
600
1950
3300
600
1630
4825
760
1800
3300
760
(4075)
(190)
(24)
600
(24)
(4295)
(130)
(24)
(3950)
(190)
(30)
(3965)
(130)
(30)
S
S
A
A
M
M
P
P
L
L
E
E