Turret Truck Parts; Primary Mast; Overhead Guard- Page 10

9 

Turret Truck Parts

Turret Truck Parts

Primary Mast

Overhead Guard

Work Lights

Operator Display 
Panel

Auxiliary Mast

Operator Harness 
and Lanyard 

(See 

chart on page 7)

Flashing Light

Lowering Valve 

(under rear cover)

Side Gate

Battery (inside)

Load Wheel

Fork

View re

fl

 ects narrow 

front rail option

Be a Safe Driver  38

DRIVE CAUTIOUSLY, BE ALERT

•  Wear your harness and have the lanyard fastened  
  when elevated, working with an open side gate, or  
  with the narrow front rail option.

•  Never stick an arm, foot or any part of your body      
  outside the operator area, no matter how slow the  
  truck is moving. A hand or foot caught between the  
  truck and a fi xed object will be crushed or even 
 cut 

off.

•  Keep your hands on the controls and feet on the   
 pedals.

•  Travel in the direction that gives you the best view.   
  Look where you're going, slow down in congested  
 areas.

•  Slow down for slippery fl oors. Don't run over things.

•  Travel with the platform close to the ground when  
  outside of an aisle. Place the load against the vertical  
  face of the forks.

•  Be certain forks and load are in the travel position.

•  Look where you are going before you change  

  direction of travel. Slow down when making turns.

•  See that you have room to drive and turn. Check for  
  overhead objects. Watch out for power unit and fork  
 (load) 

swing.

•  Make certain the load will clear the operator platform 
  before you use Traverse, Extend/Retract or Pivot.

•  Avoid sudden movement of controls. Learn to use  
  them smoothly at a moderate, even rate.

•  Check clearances before raising or lowering the forks  
  or load. Watch for overhead obstructions.

•  Be extra careful if you must use your truck in an area  
  where there is a risk of falling objects.

Continued on next page...