Wire Guidance Option ; Capacity Plate; Caution: - Page 15

33 

Wire Guidance Option 

continued

Wire Guidance Option 

continued

Know the Hazards

STAY ALERT

You must be just as careful and alert while driving on 
guidance as you are when driving with manual steering.
• Start slowly and look where you're going.
• Always be prepared to steer manually.
• Make sure there is nothing in your path, on the fl oor  
  or sticking out of the racks.

LISTEN FOR THE "BEEP", CHECK THE DISPLAY

• Take control of the steering any time the red light 
 is 

on.

• Check the display if you hear a "beep".

END OF AISLE CONTROL OPTION

With this feature, your truck will either slow down or 
stop automatically when it comes to the end of an 
aisle. You will hear a "beep" and the indicator light will 
turn on.

If the truck stops: return the travel control to neutral, 
press the override button and resume travel.

Capacity Plate

   14

Know the Hazards

Caution:  

You may not increase capacity 

if load center is less than shown on 
your capacity plate.

Note: 

 ANSI/ITSDF B56.1 requires that 

all data be shown first in Metric units 
and then USA units. 

BEFORE AUGUST 2017: READING YOUR CAPACITY PLATE

Capacity may be reduced as lift height      increases. 

For example: On the sample 

plate, 1360kg (3000 lb) can be lifted to 8000mm (315 in). But above 8000 (315), to 9220 
(363), capacity is reduced from 1360 (3000) to 1180(2600)

.

Capacity is reduced as load center      increases. 

For example: On the sample plate, 

1360kg (3000 lb) can be lifted if the load center is 600mm (24 in). But if the load center 
is increased to 865 (34), capacity is reduced from 1360 (3000) to 955 (2000).

A

B

TRUCK WEIGHT

Dockboards, elevators and some fl oors have limited
capacity. Check your capacity plate for the weight of
your truck. Remember to add the weight of the load
you have on the forks. Make certain you use the 
correct units of measure.

TRUCK TYPE

Some truck types are not permitted in areas where 
there are fi re hazards. Watch for marked areas.

For example: You must not drive a type E or ES truck into 
an area restricted to EE or EX trucks.

ATTACHMENT DATA

If an attachment on your truck does not match the
information given here on your capacity plate, don't
operate your truck. Your capacity plate may be 
wrong. Report the problem to your supervisor.

12345678

A

B

*Truck capacity must be reduced by operator 

weight in excess of 100kg (220 lb)

Loa d

Center

1125

(2500)

1350

(3000)

750

(1650)

900

(2000)

7010

(276)

6095

(240)

7010

(276)

6095

(240)

600

(24)

600

(24)

900

(36)

900

(36)

A

B

PLATFORM

Serial Number

Capacity with Mast  Vertical

Capacity

8204-A

SA

MP

LE