Turn Valve Core Clockwise To; Air Compressor With Hose And; Air Compressor Hose Into Valve- Page 221

2019 Fiat 124 Spider Abarth Owner Manual

Table of Contents

background image

13. Reinsert the valve core into the
valve and turn it clockwise to install.

Note:

The tire sealant cannot be reused.

If the tire sealant kit has been used, or
is expired, purchase a new one at an
authorized dealer.

Do not throw away the empty tire

sealant bottle after use. Return the
empty tire sealant bottle to an
authorized dealer when replacing the
tire. The empty tire sealant bottle will
need to be used to extract and
dispose of the used sealant from the
tire.

14. Install the injection hose to the tab
of the bottle to prevent leakage of any
remaining sealant.

15. Adhere the speed restriction sticker
to an area where it can be viewed easily
by the driver.

Warning!

Do not adhere the speed restriction sticker
to the padded area on the steering wheel.
Adhering the speed restriction sticker to
the padded area on the steering wheel is
dangerous because the air bag may not
operate (deploy) normally resulting in
serious injury. In addition, do not adhere
the sticker to areas where warning lights or
the speedometer cannot be viewed.

16. Pull out the air compressor hose
and the air compressor plug from the
air compressor.

17. Install the air compressor hose to
the tire valve.

18. Insert the air compressor plug into
the accessory socket, located deep in
the back of the footwell on the
passenger side, and cycle the ignition
to ACC.

19. Turn the air compressor switch on
and inflate the tire carefully to the
correct inflation pressure. For the
correct pressure, check the tire inflation
pressure label on the driver's door
frame.

Note:

When inserting the air

compressor plug into or removing it
from the accessory socket, make sure
that the air compressor switch is off.
When turning the air compressor on/off,
use the air compressor switch. Before
checking the tire inflation pressure using
the tire pressure gauge, turn the air
compressor switch off.

08020202-03A-007AB

Turn Valve Core Clockwise To

Reinstall

08020202-36A-004

Air Compressor With Hose And

Plug

2 — Air Compressor Hose

08020202-03A-00BAB

Air Compressor Hose Into Valve

219

Detailed Information for 2019 Fiat 124 Spider Abarth Owner Manual

Lists of information found in 2019 Fiat 124 Spider Abarth Owner Manual - Page 221

  • 13. Reinsert the valve core into the valve and turn it clockwise to install.
  • 14. Install the injection hose to the tab of the bottle to prevent leakage of any remaining sealant.
  • 15. Adhere the speed restriction sticker to an area where it can be viewed easily by the driver.
  • 16. Pull out the air compressor hose and the air compressor plug from the air compressor.
  • 17. Install the air compressor hose to the tire valve.
  • 18. Insert the air compressor plug into the accessory socket, located deep in the back of the footwell on the passenger side, and cycle the ignition to ACC.
  • 19. Turn the air compressor switch on and inflate the tire carefully to the correct inflation pressure.

Related Documents for 2019 Fiat 124 Spider Abarth Owner Manual