

uu
Honda Sensing
®
u
Road Departure Mitigation System
540
Driving
When you turn the Road Departure Mitigation
system on and off, do the following.
1.
Press the safety support switch.
2.
Roll the left selector wheel to the
symbol and push it.
2.
Roll the right selector wheel to the
symbol and push it.
u
A message appears on the driver
information interface when the system
turns on or off.
u
A check mark appears in the box and the
color of the
symbol changes to green
when the system is on. The check mark
disappears and the color of the
symbol changes to gray when the system
is off.
The Road Departure Mitigation system is in
the previously selected on (checked) or off
(unchecked) setting each time you start the
engine.
*1 : Models with A-type meter
*2 : Models with B-type meter
■
Road Departure Mitigation system On and Off
1
Road Departure Mitigation system On and Off
You can also select safety support content from the
driver information interface.
2
2
Driver Information Interface (Right Side
Area)
P. 138
When you have selected
Warning only
*1
/
Warning
Only
*2
from the customized options using the driver
information interface
*
or audio/information screen
*
,
the system does not operate the steering wheel.
2
2
P. 363
The Vehicle Stability Assist
TM
(VSA
®
) system, Vehicle
Stability Assist
TM
(VSA
®
)
OFF
, Adaptive Cruise Control
(ACC) with Low Speed Follow, low tire pressure/
TPMS
*
and safety support indicators may come on in
amber along with a message in the gauge when you
set the power mode to ON after reconnecting the
battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
Safety Support Switch
Left Selector
Wheel
Models with A-type meter
Models with A-type meter
Models with B-type meter
Right
Selector
Wheel
Safety Support Switch
Models with B-type meter
* Not available on all models