Dynamic radar cruise con-- Page 191

191

4-5. Using the driving support systems

4

Driving

1

Increases the speed (Except when 
the vehicle has been stopped by 
system control in vehicle-to-vehi-
cle distance control mode)

2

Decreases the speed

Fine adjustment: Momentarily move the 
lever in the desired direction.
Large adjustment: Hold the lever up or 
down to change the speed, and release 
when the desired speed is reached.

In the vehicle-to-vehicle distance con-
trol mode, the set speed will be 
increased or decreased as follows:



For the U.S. mainland, Hawaii

Fine adjustment: By 1 mph (1.6 km/h)

*1

 or 1 

km/h (0.6 mph)

*2

 each time the lever is 

operated 
Large adjustment: Increases or decreases 
in 1 mph (1.6 km/h)

*1

 or 1 km/h (0.6 mph)

*2

increments for as long as the lever is held



For Canada, Guam and Puerto Rico

Fine adjustment: By 1 mph (1.6 km/h)

*1

 or 1 

km/h (0.6 mph)

*2

 each time the lever is 

operated 
Large adjustment: Increases or decreases 
in 5 mph (8 km/h)

*1

 or 5 km/h (3.1 mph)

*2

increments for as long as the lever is held

In the constant speed control mode 
(



P.194), the set speed will be 

increased or decreased as follows:

Fine adjustment: By 1 mph (1.6 km/h)

*1

 or 1 

km/h (0.6 mph)

*2

 each time the lever is 

operated
Large adjustment: The speed will continue 
to change while the lever is held.

*1

: When the set speed is shown in “MPH”

*2

: When the set speed is shown in “km/h”



Increasing the set speed by the 
accelerator pedal

1

Accelerate with accelerator pedal 
operation to the desired vehicle 
speed

2

Push the lever down

Pressing the switch changes the vehi-
cle-to-vehicle distance as follows:

1

Long

2

Medium

3

Short

If a vehicle is running ahead of you, the pre-
ceding vehicle mark 

 will also be dis-

played.

Changing the vehicle-to-vehicle 
distance (vehicle-to-vehicle dis-
tance control mode)

A