Distance - Page 192

192

4-5. Using the driving support systems

Select a distance from the table below. 
Note that the distances shown corre-
spond to a vehicle speed of 50 mph 
(80 km/h). Vehicle-to-vehicle distance 
increases/decreases in accordance 
with vehicle speed. When the vehicle is 
stopped by system control, the vehicle 
stops at a certain vehicle-to-vehicle 
distance depending on the situation.

After the vehicle ahead of you starts 
off, push the lever up.
Your vehicle will also resume follow-up 
cruising if the accelerator pedal is 
depressed after the vehicle ahead of 
you starts off.

1

Pulling the lever toward you can-
cels the speed control.

The speed control is also canceled when 
the brake pedal is depressed. (When the 
vehicle has been stopped by system con-
trol, depressing the brake pedal does not 
cancel the setting.)

2

Pushing the lever up resumes the 
cruise control and returns vehicle 
speed to the set speed.

When your vehicle is too close to a 
vehicle ahead, and sufficient automatic 
deceleration via the cruise control is 
not possible, the display will flash and 
the buzzer will sound to alert the driver. 

Vehicle-to-vehicle distance set-
tings (vehicle-to-vehicle dis-
tance control mode)

Distance 

options

Vehicle-to-vehicle dis-

tance

Long

Approximately 160 ft. (50 

m)

Medium

Approximately 130 ft. (40 

m)

Short

Approximately 100 ft. (30 

m)

Resuming follow-up cruising 
when the vehicle has been 
stopped by system control (vehi-
cle-to-vehicle distance control 
mode)

Canceling and resuming the 
speed control

Approach warning (vehi-
cle-to-vehicle distance control 
mode)