Distance - Page 194

194

4-5. Using the driving support systems

When constant speed control mode is 
selected, your vehicle will maintain a 
set speed without controlling the vehi-
cle-to-vehicle distance. Select this 
mode only when vehicle-to-vehicle dis-
tance control mode does not function 
correctly due to a dirty radar, etc.

1

With the cruise control off, press 
and hold the “ON/OFF” button for 
1.5 seconds or more.

Immediately after the “ON/OFF” button is 

pressed, the dynamic radar cruise control 

indicator will come on. Afterwards, it 

switches to the cruise control indicator.
Switching to constant speed control mode 

is only possible when operating the lever 

with the cruise control off.

2

Accelerate or decelerate, with 
accelerator pedal operation, to the 
desired vehicle speed (at or above 
approximately 20 mph [30 km/h]) 
and push the lever down to set the 
speed.

Cruise control “SET” indicator will come 

on.
The vehicle speed at the moment the lever 

is released becomes the set speed.
Adjusting the speed setting: 



P.190

Canceling and resuming the speed setting: 



P.192

■

Dynamic radar cruise control with 

full-speed range can be set when

●

The shift lever is in D.

●

The desired set speed can be set when 

the vehicle speed is approximately 20 

mph (30 km/h) or more.

(However, when the vehicle speed is set 

while driving at below approximately 20 

mph [30 km/h], the set speed will be set 

to approximately 20 mph [30 km/h].)

■

Accelerating after setting the vehicle 

speed

The vehicle can accelerate by operating the 

accelerator pedal. After accelerating, the 

set speed resumes. However, during vehi-

cle-to-vehicle distance control mode, the 

vehicle speed may decrease below the set 

speed in order to maintain the distance to 

the preceding vehicle.

■

When the vehicle stops while follow-up 

cruising

●

Pushing the lever up while the vehicle 

ahead stops will resume follow-up cruis-

ing if the vehicle ahead starts off within 

approximately 3 seconds after the lever 

is pushed up.

●

If the vehicle ahead starts off within 3 sec-

onds after your vehicle stops, follow-up 

cruising will be resumed.

■

Automatic cancelation of vehi-

cle-to-vehicle distance control mode

Vehicle-to-vehicle distance control mode is 

automatically canceled in the following situ-

ations.

●

VSC is activated.

●

TRAC is activated for a period of time.

Selecting constant speed con-
trol mode