

214
4-5. Using the driving support systems
on the position above the rear bumper
●
When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog
●
When multiple vehicles are approaching
with only a small gap between each vehi-
cle
●
When a vehicle is approaching at high
speed
●
When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow
●
When backing up on a slope with a sharp
change in grade
●
When backing out of a sharp angle park-
ing spot
●
When towing a trailer
●
When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
●
When a sensor or the area around a sen-
sor is extremely hot or cold
●
If the suspension has been modified or
tires of a size other than specified are
installed
●
If the front of the vehicle is raised or low-
ered due to the carried load
●
When turning while backing up
●
When a vehicle turns into the detection
area
■
Situations in which the system may
operate even if there is no possibility of a
collision
Instances of the RCTA function unneces-
sary detecting a vehicle and/or object may
increase in the following situations:
●
When the parking space faces a street
and vehicles are being driven on the
street
●
When the distance between your vehicle
and metal objects, such as a guardrail,
wall, sigh, or parked vehicle, which may
reflect electrical waves toward the rear of
the vehicle, is short