Press - Page 217

217

4-5. Using the driving support systems

4

Driving

The Parking Support Brake can be 
enabled/disabled on the multi-informa-
tion display. All of the Parking Support 
Brake functions (static objects and 
rear-crossing vehicles) are 
enabled/disabled simultaneously.
Use the meter control switches to 
enable/disable the parking support 
brake. (



P.76)

1

Press 

 or 

 to select 

.

2

Press 

 or 

 to select “

PKSB” and then press 

.

When the Parking Support Brake is dis-

abled, the PKSB OFF indicator (



P.66) 

illuminates on the multi-information dis-

play.
When the Parking Support Brake is turned 

on or off, operation of the Parking Support 

Brake continues in the same condition the 

next time the engine is started.

If the engine output restriction control or 
brake control operates, a buzzer will sound 
and a message will be displayed on the 
Center Display and multi-information dis-
play, to alert the driver.
Depending on the situation, engine output 
restriction control will operate to either 
limit acceleration or restrict output as 
much as possible.



Engine output restriction control is 
operating (acceleration restriction)

Acceleration greater than a certain 
amount is restricted by the system.
Center Display (Panoramic view monitor) 
(If equipped): No warning displayed
Multi-information display: “Object 
Detected Acceleration Reduced”
PKSB OFF indicator: Not illuminated
Buzzer: Does not sound



Engine output restriction control is 
operating (output restricted as 
much as possible)

The system has determined that stron-
ger-than-normal brake operation is neces-
sary.

WARNING

●

When the vehicle is driven in a sporty 

manner or off-road

●

When the tires are not properly 

inflated

●

When the tires are very worn

●

When a tire chains, compact spare tire 

or an emergency tire puncture repair 

kit is used

NOTICE

■

If “Parking Support Brake Unavail-

able” is displayed on the multi-infor-

mation display and the PKSB OFF 

indicator is flashing

If this message is displayed immediately 

after the engine switch is changed to 

IGNITION ON mode, operate the vehi-

cle carefully, paying attention to your sur-

roundings. It may be necessary to drive 

the vehicle for a certain amount of time 

before the system returns to normal. (If 

the system is not return to normal after 

driving for a while, clean the sensors and 

their surrounding area on the bumpers.)

Enabling/Disabling the Parking 
Support Brake

Displays and buzzers for engine 
output restriction control and 
brake control