PKSB (Parking Support - Page 216

216

4-5. Using the driving support systems

*

: If equipped

■

Parking Support Brake function 
(static objects)



P.222

■

Parking Support Brake function 
(rear-crossing vehicles)



P.225

PKSB (Parking Support 
Brake)

*

The Parking Support Brake system 
consists of the following functions 
that operate when driving at a low 
speed or backing up, such as when 
parking. When the system deter-
mines that the possibility of a colli-
sion with a detected object is high, a 
warning operates to urge the driver 
to take evasive action. If the system 
determines that the possibility of a 
collision with a detected object is 
extremely high, the brakes are 
automatically applied to help avoid 
the collision or help reduce the 
impact of the collision.

PKSB (Parking Support Brake) 
system

WARNING

■

Cautions regarding the use of the sys-

tem

Do not overly rely on the system, as 

doing so may lead to an accident.

●

The driver is solely responsible for safe 

driving. Always drive carefully, taking 

care to observe your surroundings. 

The Parking Support Brake system is 

designed to provide support to lessen 

the severity of collisions. However, it 

may not operate in some situations.

●

The Parking Support Brake system is 

not designed to stop the vehicle com-

pletely. Additionally, even if the system 

has stopped the vehicle, it is necessary 

to depress the brake pedal immedi-

ately as brake control will be canceled 

after approximately 2 seconds.

●

It is extremely dangerous to check the 

system operations by intentionally 

driving the vehicle into the direction of 

a wall, etc. Never attempt such actions.

■

When to disable the Parking Support 

Brake

In the following situations, disable the 

Parking Support Brake as the system 

may operate even though there is no 

possibility of a collision.

●

When inspecting the vehicle using a 

chassis roller, chassis dynamo or free 

roller

●

When loading the vehicle onto a boat, 

truck or other transport vessel

●

If the suspension has been modified or 

tires of a size other than specified are 

installed

●

If the front of the vehicle is raised or 

lowered due to the carried load

●

When equipment that may obstruct a 

sensor is installed, such as a towing 

eyelet, bumper protector (an addi-

tional trim strip, etc.), bicycle carrier, or 

snow plow

●

When using automatic car washing 

devices

●

If the vehicle cannot be driven in a sta-

ble manner, such as when the vehicle 

has been in an accident or is malfunc-

tioning