Brake Warning; Master Warning; Low Fuel Level- Page 33

2017 Mazda CX-3 Cx 3 Smart Start Guide

background image

32

www.MazdaUSA.com

TRIP COMPUTER 

The following information 

can be selected by pushing 

the   or   of the INFO 

button on the steering wheel.

  

 

•  Approximate distance you 

can travel on the available 

fuel (RANGE)

  

 

•  Average fuel economy

  

 

•  Current fuel economy

  

 

•  Average vehicle speed

  

 

•  To reset, push and hold 

the INFO button for more 

than 1.5 seconds.

1

• Rotate the knob to adjust the brightness of the 

instrument cluster and other dashboard illuminations.

2

• Push to toggle between trip meter (A & B).

  •  When a trip meter is selected, push and hold to 

reset to zero.

3

 •  Push the knob for 1.5 seconds or more to change 

the speed units between mph.

 

 

Brake Warning

 

Parking brake on/low brake  
fluid/malfunction

 

Master Warning

 

Low Fuel Level

  

Low Engine Oil Pressure

 

Power Steering Malfunction

  Automatic Transaxle 
  Charging System Malfunction

 

 

Door/Tailgate Ajar

 

 

Low Washer Fluid Level

 

 

KEY Warning (

RED

)

 

 

KEY Indicator (

GREEN

)

 

 

Check Fuel Cap

 

 

 Perform Maintenance

ENGINE COOLANT TEMP LIGHTS 

Since this vehicle does not use an engine 

coolant temperature gauge, red and blue 

engine coolant temperature lights are used to 

indicate high and low coolant temperature.

 

Red Coolant Temp Light

  

Flashing:

 Engine is starting to run hot. 

Drive slowly to reduce engine load. 

  

On:

 Engine is overheating. Safely pull 

over to the side of the road and turn  

the engine off. Refer to the Owner’s 

Manual for more information.

 

Blue Coolant Temp Light

  

On:

 Engine coolant is cold and no warm 

air is available for heater/defroster. 

  

Off:

 Engine coolant is warm and warm air 

is available for heater/defroster. The light 

may stay on for a few minutes after start-

up when the engine is cold, but the vehicle 

can be driven with the light on or off.

NOTE:

 

When your Mazda Connect display 

setting is set on “auto”, the instrument  

cluster and display may become dimmer 

when the headlights are on. If the display 

and instrument cluster become too dim or 

too bright when the headlights are on, simply 

rotate the dimmer knob located on your 

instrument cluster to adjust the brightness.

DASHBOARD 

ILLUMINATION/ 

DIMMER

1

TRIP METER

NOTE:

 See Owner’s Manual for 

more details and explanations.

2671727 17c CX-3 SSG 100516.indd   32

10/5/16   5:16 PM

Detailed Information for 2017 Mazda CX-3 Cx 3 Smart Start Guide

Lists of information found in 2017 Mazda CX-3 Cx 3 Smart Start Guide - Page 33

  • 1.5 seconds.
  • 1.5 seconds or more to change the speed units between mph.
  • Approximate distance you can travel on the available fuel (RANGE) • Average fuel economy • Current fuel economy • Average vehicle speed • To reset, push and hold the INFO button for more than 1.
  • Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.
  • Push to toggle between trip meter (A & B).
  • When a trip meter is selected, push and hold to reset to zero.
  • Push the knob for 1.