33
Instrument Cluster (Type B)
TCS
OFF
Traction Control System
(TCS) OFF
Traction Control System (TCS)/
Dynamic Stability Control (DSC)
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
OFF
Blind Spot Monitoring
(BSM) OFF
(p. 21)
SPORT Mode On
(p. 35)
Lights On (Exterior)
High Beam Control On
Headlight High Beams On
Air Bag/Front Seat Belt
Pretensioner System Malfunction
4WD
4-Wheel Drive (4WD)
On:
Flashing: Stop vehicle/tow to
Mazda dealer.
Check Engine
LED Headlight
Seat Belt Unbuckled/Malfunction
Turn Signals/Hazard
Tire Pressure Monitoring System
(TPMS)
(p. 5)
On/Warning Beep: Low tire pressure in one
or more tires. Flashing: TPMS Malfunction
Cruise Main On (
AMBER
)/
Cruise Set On (
GREEN
)
Anti-lock Brake System
(ABS) Malfunction
Shift Position
Security System
Brake Warning
Parking brake on/low brake
fluid/malfunction
TPMS NOTE:
Low ambient temperature and/or high altitude may cause tire pressures
to change and turn the TPMS warning light on. If the warning light comes on, see p. 5.
OUTSIDE
TEMPERATURE DISPLAY
The outside temperature unit can
be switched between °C and °F
using the following procedure:
Without Mazda Connect:
1
Push the INFO button with
the ignition OFF and continue
pushing the INFO button for
5 seconds or longer after
switching the ignition ON.
The outside temperature
display flashes.
2
Push the up or down part of
the INFO switch to change
the temperature unit.
3
Push and hold the INFO
button for 3 seconds or
longer until it stops flashing.
With Mazda Connect:
1
Go to System Settings.
IMPORTANT:
When your Mazda Connect display
setting is set on “AUTO”, the instrument cluster and
display may become dimmer when the headlights
are on. If the display and instrument cluster
become too dim or too bright when the headlights
are on, simply rotate the dimmer knob located on
your instrument cluster to adjust the brightness.
TACHOMETER
SPEED UNIT
SELECTOR
3
GLOSSARY OF WARNING AND INDICATOR LIGHTS
2671727 17c CX-3 SSG 100516.indd 33
10/5/16 5:16 PM