Returning rear seats to upright position:; FOLDING REAR SEATS; NOTE: - Page 7

6

www.MazdaUSA.com

Returning rear seats to upright position:

1

  Install the headrest (if removed).

2

  Raise seatbacks until they lock  

into position.

3

  Pull on the top of the seatbacks to 

make sure they are locked.

4

  Check that all seat belts are routed 

properly for passenger use.

Seats

FOLDING REAR SEATS

Push the button to fold down the seatback.

NOTE:

For tall drivers and front passengers who 

adjust the front seats all the way back, the headrests 

on the rear seats need to be removed when folding 

the rear seatbacks down. If not removed, the rear 

headrest will push into the front seatback. In order 

to remove the headrest from the rear seat, the 

seatback needs to be tilted slightly forward.

NOTE: 

Left rear seat release is shown.

Unlocked

Locked

BREAK-IN PERIOD 

No special break-in is necessary, but a few 
precautions in the first 600 miles should  
be observed. 

•   Do not race the engine. 
•   Do not maintain one constant speed, either 

slow or fast, for a long period of time.

•  Avoid full-throttle starts. 
•  Avoid unnecessary hard stops.
•   Do not drive constantly at full-throttle or high 

engine rpm for extended periods of time. 

FUEL ECONOMY:

To achieve the  

best fuel economy, visit  

www.fueleconomy.gov

for more information.

2671727 17c CX-3 SSG 100516.indd   6

10/5/16   5:09 PM