Master Warning; Low Fuel Level; Low Engine Oil Pressure- Page 35

2017 Mazda CX-3 Cx 3 Smart Start Guide

background image

34

www.MazdaUSA.com

TRIP COMPUTER 

The following information 

can be selected by pushing 

the   or   of the INFO 

button on the steering wheel.

  

 

•  Approximate distance you 

can travel on the available 

fuel (RANGE)

  

 

•  Average fuel economy

  

 

•  Current fuel economy

  

 

•  Average vehicle speed

  

 

•  To reset, push and hold 

the INFO button for more 

than 1.5 seconds.

1

• Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.

2

• Push to toggle between trip meter (A & B).

  •  When a trip meter is selected, push and hold to reset to zero. 

3

  

• Push the knob for 1.5 seconds or more to change the speed units between mph.

 

Master Warning

 

Low Fuel Level

 

Low Engine Oil Pressure
Power Steering Malfunction
 Automatic Transaxle 

 

Charging System Malfunction

 

Door/Tailgate Ajar

 

 

Low Washer Fluid Level

 

KEY Warning (

RED

)

 

KEY Indicator (

GREEN

)

 

Check Fuel Cap

 

 Perform Maintenance

NOTE:

 See Owner’s Manual for more 

details and explanations.

ENGINE COOLANT TEMP LIGHTS 

Since this vehicle does not use an engine 

coolant temperature gauge, red and blue 

engine coolant temperature lights are used to 

indicate high and low coolant temperature.

 

Red Coolant Temp Light

  

Flashing:

 Engine is starting to run hot. 

Drive slowly to reduce engine load. 

  

On:

 Engine is overheating. Safely pull 

over to the side of the road and turn  

the engine off. Refer to the Owner’s 

Manual for more information.

 

Blue Coolant Temp Light

  

On:

 Engine coolant is cold and no warm 

air is available for heater/defroster. 

  

Off:

 Engine coolant is warm and warm air 

is available for heater/defroster. The light 

may stay on for a few minutes after start-

up when the engine is cold, but the vehicle 

can be driven with the light on or off.

NOTE:

 When your Mazda Connect display setting is set on “auto”, the instrument cluster 

and display may become dimmer when the headlights are on. If the display and instrument 

cluster become too dim or too bright when the headlights are on, simply rotate the dimmer 

knob located on your instrument cluster to adjust the brightness.

DASHBOARD 

ILLUMINATION/ 

DIMMER

1

TRIP METER

2671727 17c CX-3 SSG 100516.indd   34

10/5/16   5:16 PM

Detailed Information for 2017 Mazda CX-3 Cx 3 Smart Start Guide

Lists of information found in 2017 Mazda CX-3 Cx 3 Smart Start Guide - Page 35

  • 1.5 seconds.
  • 1.5 seconds or more to change the speed units between mph.
  • Approximate distance you can travel on the available fuel (RANGE) • Average fuel economy • Current fuel economy • Average vehicle speed • To reset, push and hold the INFO button for more than 1.
  • Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.
  • Push to toggle between trip meter (A & B).
  • When a trip meter is selected, push and hold to reset to zero.
  • Push the knob for 1.