Owner Maintenance; Rear turn signal lights, Brake lights/; Taillights/Rear side-marker lights (Type- Page 489

4. Pull the center of each plastic retainer

using a flathead screwdriver and
remove the retainers, and then partially
peel back the mudguard.

Removal

Installation

5. Turn the socket and bulb assembly

counterclockwise and remove it.

6. Disconnect the bulb from the socket.

7. Install the new bulb in the reverse

order of the removal procedure.

Rear turn signal lights, Brake lights/
Taillights/Rear side-marker lights (Type
B)

1. Make sure the ignition is switched off,

and the turn signal switch is off.

2. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
cover, and then remove the cover with
the flathead screwdriver.

3. Turn the screws counterclockwise and

remove them.

4. Pull the unit rearward to remove it.

5. Turn the socket and bulb assembly

counterclockwise and remove it.

Maintenance and Care

Owner Maintenance

6-45

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26