Replacing Interior Light Bulbs; Owner Maintenance; Rear turn signal lights- Page 490

6. Disconnect the bulb from the socket.

Rear turn signal lights

Brake lights/Taillights/Rear
side-marker lights

7. Install the new bulb in the reverse

order of the removal procedure.

License plate lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Wrap a flathead screwdriver with a

soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with a flathead screwdriver.

3. Disconnect the bulb by pulling it out.

4. Install the new bulb in the reverse

order of the removal procedure.

▼

Replacing Interior Light Bulbs

Overhead light/Front map lights, Rear
map lights, Vanity mirror lights

*

1. Wrap a flathead screwdriver with a

soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with a flathead screwdriver.

Maintenance and Care

Owner Maintenance

6-46

*Some models.

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26