Before Driving; Master control switches; Power window system initialization - Page 121

3–39

Before Driving

Windows

Normal opening/closing

To open the window to the desired 

position, lightly hold down the switch.

To close the window to the desired 

position, lightly pull up the switch.

Driver's window

Open

Close

Master control switches

Open

Close

Auto-opening/closing

To fully open the window automatically, 

press the switch completely down.

To fully close the window automatically, 

pull the switch completely up.

To stop the window partway, pull or press 

the switch in the opposite direction and 

then release it.

Power window system initialization 

procedure

If the battery was disconnected during 

vehicle maintenance, or for other reasons 

(such as a switch continues to be operated 

after the window is fully open/closed), 

the window will not fully open and close 

automatically.

Resetting of the automatic function can 

be performed using the master control 

switches or each passenger door switch.

The power window auto function reset 

procedure can be done on all door 

switches. The power window auto function 

will only resume on the power window 

that has been reset.

1.  Switch the ignition ON.

2.  Make sure that the power window lock 

switch located on the driver's door is 

not depressed.

3.  Press the switch and fully open the 

window.

4.  Pull up the switch to fully close the 

window and continue holding the 

switch for about 2 seconds after the 

window fully closed.

5.  Repeat Steps 3-4 for the front 

passenger power window while seated 

in the front passenger seat.

6.  Repeat Steps 3-4 for both the left and 

right rear power windows while seated 

in the rear seat.

7.  Make sure that the power windows 

operate correctly using the door 

switches.

After the system has been re-initialized, 

each passenger window can be fully 

opened or closed automatically using the 

master control switches.

CX-9_8FD6-EA-16B_Edition3.indb   39

2016/03/18   11:47:41