Before Driving- Page 126

3–44

Before Driving

Windows

NOTE

Before washing your Mazda, make sure 

the moonroof is completely closed so that 

water does not get inside the cabin area. 

After washing your Mazda or after it rains, 

wipe the water off the moonroof before 

operating it to avoid water penetration 

which could cause rust and water damage 

to your headliner.

 Tilt Operation

The rear of the moonroof can be tilted 

open to provide more ventilation.

To fully tilt automatically, momentarily 

press the tilt/slide switch.

To fully close automatically, momentarily 

press the tilt/slide switch in the forward 

direction.

To stop tilting partway, press the tilt/slide 

switch.

Close (Tilt down)

 Tilt up

 Slide Operation

To fully open automatically, momentarily 

press the tilt/slide switch in the backward 

direction.

To fully close automatically, momentarily 

press the tilt/slide switch in the forward 

direction.

To stop sliding partway, press the tilt/slide 

switch.

Close

Open

 Power Moonroof Reset Procedure

If the battery is disconnected, the 

moonroof will not operate. The moonroof 

will not operate correctly until it is reset. 

Carry out the following procedure to reset 

the moonroof and resume operation:

1.  Switch the ignition ON.

2.  Press the tilt switch, to partially tilt 

open the rear of the moonroof.

3.  Repeat Step 2. The rear of the 

moonroof tilts open to the fully open 

position, then closes a little.

NOTE

If the reset procedure is performed while 

the moonroof is in the slide position 

(partially open) it will close before the 

rear tilt opens.

CX-9_8FD6-EA-16B_Edition3.indb   44

2016/03/18   11:47:44