Essential Safety Equipment; To move the driving position to a ; Erasing programmed driving positions- Page 21

2–9

Essential Safety Equipment

Seats

To move the driving position to a 

programmed position

(Using a button on the side of the seat)

1.  Make sure the parking brake is on.

2.  Make sure the selector lever is in the P 

position.

3.  Start the engine.

4.  Press the programming button for the 

driving position you want to call up 

(button 1 or 2).

5.  A beep sound is heard when the driving 

position adjustment is completed.

NOTE



  If the driving position movement is not 

changed, only the beep sounds.



  A seat position can be called up even 

with the engine not running.



  The driving position adjustment is 

canceled in the following cases:



  Any of the seat adjustment switches 

is operated.



  The SET button is pressed.



  Programming button 1 or 2 is 

pressed.



  The key   button or   button is 

operated.



  The vehicle starts moving.



  The active driving display is 

adjusted.

(Using a programmed key)

1.  Unlock the doors by pressing a request 

switch or the key   button.

2.  After unlocking the doors, the seat 

position adjustment begins within 40 

seconds of opening the driver's door, 

and a beep sounds when the operation 

is finished.

3.  Make sure the parking brake is on.

4.  Make sure the selector lever is in the P 

position.

5.  Start the engine.

6.  The active driving display adjustment 

begins.

NOTE



  If there is no driving position movement, 

a beep is not heard.



  The driving position adjustment is 

canceled in the following cases:



  Any of the seat adjustment switches 

is operated.



  The SET button is pressed.



  Programming button 1 or 2 is 

pressed.



  The key   button or   button is 

operated.



  The vehicle starts moving.



  The active driving display is 

adjusted.

Erasing programmed driving positions

(Erasing the driving positions 

programmed to the key)

1.  Switch the ignition OFF.

2.  Press the SET button on the side of the 

seat until a beep sound is heard one 

time.

3.  After the beep sounds, press the key   

button within 5 seconds until a beep 

sound is heard one time.

NOTE

If a beep sound is heard three times, the 

operation is canceled.

CX-9_8FD6-EA-16B_Edition3.indb   9

2016/03/18   11:46:51