When Driving; Vehicle lane line display- Page 270

4–122

When Driving

i-ACTIVSENSE

NOTE



  The Lane-keep Assist System (LAS) 

& Lane Departure Warning System 

(LDWS) does not operate until the 

system detects white (yellow) lane lines 

on either the left or right.



  When the system detects a white 

(yellow) lane line on one side only, the 

system will not activate warnings for the 

lane line on the side that is not being 

detected. The warning is only for a 

lane deviation on the side that is being 

detected.



  If the driver takes his or her hands off 

the steering wheel (not holding the 

steering wheel), the warning sound is 

activated and an alert is indicated in the 

multi-information display.

  If the steering wheel is held lightly, 

or depending on the road conditions, 

the system may detect that you have 

released the steering wheel (not holding 

the steering wheel) even if you are 

holding it, and display a message in the 

multi-information display.



  The timing at which the lane departure 

warning is activated and the steering 

wheel operation assist is performed 

varies.



  The following settings for the Lane-

keep Assist System (LAS) & Lane 

Departure Warning System (LDWS) can 

be changed. Refer to Personalization 

Features on page 9-11.



  Steering operation assist 

operational/non-operational



  Cancel sensitivity (likelihood of 

steering assist)

Vehicle lane line display

When the Lane-keep Assist System 

(LAS) & Lane Departure Warning System 

(LDWS) becomes operational while 

on standby, the vehicle lane lines are 

displayed in the multi-information display 

and the active driving display. In the 

vehicle lane lines display indicating the 

operation status, the color of the vehicle 

lane lines being detected changes to white.

CX-9_8FD6-EA-16B_Edition3.indb   122

2016/03/18   11:49:08