When Driving; Rear View Monitor- Page 304

4–156

When Driving

Rear View Monitor

NOTE



  If water, snow, or mud is stuck on the camera lens, wipe it off using a soft cloth. If it 

cannot be wiped off, use a mild detergent.



  If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear view 

monitor may not operate correctly.



  When replacing the tires, consult an Authorized Mazda Dealer. Replacing the tires could 

result in deviation of the guide lines which appear on the display.



  If the vehicle's front, side, or rear has been involved in a collision, the alignment of 

the rear view parking camera (location, installation angle) may have deviated. Always 

consult an Authorized Mazda Dealer to have the vehicle inspected.



  If “No Video Signal Available” is indicated in the display, there could be a problem with 

the camera. Have your vehicle inspected at an Authorized Mazda Dealer.

 Rear View Parking Camera Location

Rear view parking camera

 Switching to the Rear View Monitor Display

Shift the selector lever to reverse (R) with the ignition switched ON to switch the display to 

the rear view monitor display.

NOTE

When the selector lever is shifted from reverse (R) to another selector lever position, the 

screen returns to the previous display.

CX-9_8FD6-EA-16B_Edition3.indb   156

2016/03/18   11:49:19