Appearance Care; Authorized Mazda Dealer:; Maintenance and Care- Page 481

6–69

Maintenance and Care

Appearance Care

*Some models.

 Seat Belt Maintenance

1.  Clean the soiled area by lightly dabbing 

it with a soft cloth soaked in a mild 

detergent (approx. 5%) diluted with 

water.

2.  Wipe off the remaining detergent using 

a cloth soaked in clean water and 

wrung out well.

3.  Before retracting seat belts which have 

been pulled out for cleaning, dry them 

off thoroughly and make sure there is 

no remaining moisture on them.

WARNING

If a seat belt appears frayed or has 

abrasions, have it replaced by an 

Authorized Mazda Dealer:

If a seat belts is used under such a 

condition, it cannot function at its full 

capacity which could result in serious 

injury or death.

Use a mild detergent to remove soiling 

from a seat belt:

If organic solvents are used for 

cleaning the seat belts or they 

become stained or bleached, there 

is the possibility of them becoming 

weakened and as a result, they may 

not function at their full capacity 

which could cause serious injury or 

death.

NOTE

Clean seat belts diligently if they get 

dirty. Leaving them uncleaned will make 

it difficult to clean them later, and it may 

affect the smooth retracting of the seat 

belt.

 Vinyl Upholstery Maintenance

Remove dust and dirt from the vinyl 

upholstery using a brush or vacuum.

Remove soiling from vinyl upholstery 

using a leather and vinyl upholstery 

cleaner.

 Upholstery Maintenance

1.  Clean the soiled area by lightly dabbing 

it with a soft cloth soaked in a mild 

detergent (approx. 5%) diluted with 

water.

2.  Wipe off the remaining detergent using 

a cloth soaked in clean water and 

wrung out well.

 Leather Upholstery Maintenance

*

1.  Remove dust and sand using a vacuum 

cleaner.

2.  Wipe off the soiled area with a soft 

cloth and a suitable, special cleaner or 

a soft cloth soaked in a mild detergent 

(about 5%) diluted with water.

3.  Wipe off the remaining detergent using 

a cloth soaked in clean water and 

wrung out well.

4.  Remove moisture with a dry, soft cloth 

and allow the leather to further dry in 

a well-ventilated, shaded area. If the 

leather gets wet such as from rain, 

remove the moisture and dry it as soon 

as possible.

CX-9_8FD6-EA-16B_Edition3.indb   69

2016/03/18   11:51:28