Essential Safety Equipment; Child Restraint- Page 50

2–38

Essential Safety Equipment

Child Restraint

1. 

(Second-row seat)

  Adjust the second-row seat position 

using the following procedure.

  Fold the second-row seatback 

forward.

  Raise the second-row seatback until 

a click sound is heard and it is 

locked in place.

  Fold the second-row seatback 

backward 8 notches (16 degrees).

8 notches (16 degrees)

2.  Make sure the seatback is securely 

latched by pushing it back until it is 

fully locked.

3. 

(Second-row seat)

  Remove the head restraint.

  Refer to Head Restraints on page 

2-16.

4.  Secure the child-restraint system with 

the lap portion of the lap/shoulder belt. 

See the manufacturer's instructions 

on the child-restraint system for belt 

routing instructions.

5.  To get the retractor into the automatic 

locking mode, pull the shoulder belt 

portion of the seat belt until the entire 

length of the belt is out of the retractor.

6.  Push the child-restraint system firmly 

into the vehicle seat. Be sure the 

belt retracts as snugly as possible. A 

clicking noise from the retractor will be 

heard during retraction if the system is 

in the automatic locking mode. If the 

belt does not lock the seat down tight, 

repeat this step.

CX-9_8FD6-EA-16B_Edition3.indb   38

2016/03/18   11:47:07