If Trouble Arises; Warning/Indicator Lights and Warning Sounds- Page 520

7–36

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

(Amber)

KEY Warning 

Indication

*

“Keyless System Malfunction” is displayed

This message is displayed if the advanced keyless entry & push button start system has a 

problem.

Contact an Authorized Mazda Dealer.

CAUTION

If the message is indicated, or the push button start indicator light (amber) flashes, the 

engine may not start. If the engine cannot be started, try starting it using the emergency 

operation for starting the engine, and have the vehicle inspected at an Authorized 

Mazda Dealer as soon as possible.

Refer to Emergency Operation for Starting the Engine on page 4-10.

“Ignition is On” is displayed

This message is displayed when the driver's door is opened without switching the ignition 

off.

“Key Not Detected” is displayed

This message is displayed when any of the following operations is performed with the key 

out of the operational range or placed in areas inside the cabin where it is difficult for the 

key to be detected.



The push button start is pressed with the ignition switched off



The ignition is switched on



All doors are closed without switching the ignition off

(Red)

(Illuminate)

KEY Warning 

Light

*

If any malfunction occurs in the keyless entry system, it illuminates continuously.

CAUTION

If the key warning indicator light illuminates or the push button start indicator light 

(amber) flashes, the engine may not start. If the engine cannot be started, try starting it 

using the emergency operation for starting the engine, and have the vehicle inspected 

at an Authorized Mazda Dealer as soon as possible.

Refer to Emergency Operation for Starting the Engine on page 4-10.

(Amber)

High Beam Control 

System (HBC) 

Warning Light

*

The light remains turned on if there is a problem with the system. Have your vehicle 

inspected at an Authorized Mazda Dealer.

NOTE

If the windshield area in front of the Forward Sensing Camera (FSC) is fogged or 

obstructed, the light turns on temporarily. If the light remains turned on, there may be a 

problem with the system.

Blind Spot 

Monitoring (BSM) 

Warning Indication/

Warning Light

*

This light illuminates if there is a malfunction in the Blind Spot Monitoring (BSM). Have 

your vehicle inspected by an Authorized Mazda Dealer.

NOTE

If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can 

detect, the system may pause. However, it does not indicate a malfunction.

CX-9_8FD6-EA-16B_Edition3.indb   36

2016/03/18   11:51:57