Essential Safety Equipment; Child Restraint; Installation on second-row outboard - Page 57

2–45

Essential Safety Equipment

Child Restraint

Installation on second-row outboard 

seats

1.  First, adjust the front seat to allow 

clearance between the child-restraint 

system and the front seat (page 

2-5).

2.  Adjust the second-row seat position 

using the following procedure.

  Fold the second-row seatback 

forward.

  Raise the second-row seatback until 

a click sound is heard and it is 

locked in place.

  Fold the second-row seatback 

backward 8 notches (16 degrees).

8 notches (16 degrees)

3.  Make sure the seatback is securely 

latched by pushing it back until it is 

fully locked.

4.  Expand the area between the seat 

bottom and the seatback slightly to 

verify the locations of the LATCH 

lower anchors.

NOTE

The markings above the LATCH lower 

anchors indicate the locations of the 

LATCH lower anchors for the attachment 

of a child-restraint system.

5.  Remove the head restraint.

  Refer to Head Restraints on page 

2-16.

6.  Secure the child-restraint system 

using BOTH LATCH lower anchors, 

following the child-restraint system 

manufacturer's instruction. Pull on the 

child-restraint to be sure both anchors 

are engaged.

7.  If your child-restraint system came 

equipped with a tether, that means it is 

very important to properly secure the 

tether for child safety. Please carefully 

follow the child-restraint system 

manufacturer's instructions when 

installing tethers.

CX-9_8FD6-EA-16B_Edition3.indb   45

2016/03/18   11:47:09