Before Driving; Doors and Locks- Page 97

3–15

Before Driving

Doors and Locks



  It may require a few seconds for the 

doors to unlock after the request switch 

is pressed.



  A beep sound is heard for confirmation 

when the doors and the liftgate are 

locked/unlocked using the request 

switch. If you prefer, the beep sound can 

be turned off.

  The volume of the beep sound can also 

be changed. Refer to Personalization 

Features on page 9-11.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close all 

of the doors and the liftgate.

2.  Open the driver's door.

3.  Within 30 seconds of opening the 

driver's door, press and hold the 

LOCK button on the key for 5 

seconds or longer.

  All of the doors and the liftgate lock 

and the beep sound activates at the 

currently set volume. The setting 

changes each time the LOCK button 

on the key is pressed and the beep 

sound activates at the set volume. (If 

the beep sound has been set to not 

activate, it will not activate.)

4.  The setting change is completed by 

doing any one of the following:



  Switching the ignition to ACC or 

ON.



  Closing the driver's door.



  Opening the liftgate.



  Not operating the key for 10 

seconds.



  Pressing any button except the 

LOCK button on the key.



  Pressing a request switch.



  (With theft-deterrent system)

  The hazard warning lights flash when 

the theft-deterrent system is armed or 

turned off.

  Refer to Theft-Deterrent System on page 

3-48.



  The setting can be changed so that 

the doors and the liftgate are locked 

automatically without pressing the 

request switch.

  Refer to Personalization Features on 

page 9-11.

  (Auto-lock function)

  A beep sound is heard when all doors 

and the liftgate are closed while the 

advanced key is being carried. All doors 

and the liftgate are locked automatically 

after about three seconds when the 

advanced key is out of the operational 

range. Also, the hazard warning lights 

flash once. (Even if the driver is in the 

operational range, all doors and the 

liftgate are locked automatically after 

about 30 seconds.) If you are out of 

the operational range before the doors 

and the liftgate are completely closed 

or another key is left in the vehicle, the 

auto-lock function will not work. Always 

make sure that all doors and the liftgate 

are closed and locked before leaving the 

vehicle. The auto-lock function does not 

close the power windows.

CX-9_8FD6-EA-16B_Edition3.indb   15

2016/03/18   11:47:26