Rear View Monitor Operation; When Driving; Rear View Monitor- Page 363

2019 Mazda Mazda3 Sedan Owners Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

b) Distance guide lines

These guide lines indicate the approximate distance to a point measured from the
vehicle's rear (from the end of the bumper).
The red and yellow lines indicate the points about 50 cm (19 in) for the red line and 100
cm (39.3 in) for the yellow lines from the rear bumper (at the center point of each of the
lines).

CAUTION

The guide lines on the screen are fixed lines. They are not synced to the driver's turning of the
steering wheel. Always be careful and check the area to the vehicle's rear and the surrounding
area directly with your eyes while backing up.

Rear View Monitor Operation

The operation of the rear view monitor when reversing the vehicle varies depending on the
traffic, road, and vehicle conditions. The amount of steering and the timing also varies
depending on conditions, so confirm the surrounding conditions directly with your eyes and
steer the vehicle in accordance with the conditions.
Be well aware of the above cautions prior to using the rear view monitor.

Predicted vehicle path assist lines display type

NOTE

The following shows an example of vehicle parking in which the steering wheel is turned to
the right when backing up the vehicle. The operation is reversed when backing up the
vehicle from the opposite direction.

1. Shift the shift lever (manual transmission) or the selector lever (automatic transmission)

to reverse (R) position to switch the display to the rear view monitor display.

When Driving

Rear View Monitor

4-223

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58

Detailed Information for 2019 Mazda Mazda3 Sedan Owners Manual

Lists of information found in 2019 Mazda Mazda3 Sedan Owners Manual - Page 363

  • 39.3 in) for the yellow lines from the rear bumper (at the center point of each of the lines).
  • 1. Shift the shift lever (manual transmission) or the selector lever (automatic transmission) to reverse (R) position to switch the display to the rear view monitor display.