Owner Maintenance; Rear turn signal lights; Maintenance and Care- Page 414

5. Detach the electrical connector from

the unit by pulling it to the rear.
 

6. Install the new side turn signal unit in

the reverse order of the removal
procedure.

Rear turn signal lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Pull the center of each plastic retainer

and remove the retainers and the trunk
end trim.
 

Removal

In

s

tallation

3. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.
 

4. Pull the center of each plastic retainer

and remove the retainers, and then
partially peel back the trunk side trim.
 

Removal

In

s

tallation

Maintenance and Care

Owner Maintenance

6-44

MX-5_8GF7-EA-17J_Edition2

2017-10-31 14:07:27