Driver Controls; WARNING: Make sure that the liftgate door and/or window are; closed to prevent exhaust fumes from being drawn into the- Page 76

2002 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

Do not leave the liftgate or liftgate glass open while driving. Doing so

could cause serious damage to the liftgate and its components as well

as allowing carbon monoxide to enter the vehicle.

WARNING: Make sure that the liftgate door and/or window are

closed to prevent exhaust fumes from being drawn into the

vehicle. This will also prevent passengers and cargo from falling

out. If you must drive with the liftgate door or window open,

keep the vents open so outside air comes into the vehicle.

LUGGAGE RACK

The maximum load for the roof rack is 44 kg (100 lbs), evenly

distributed on the crossbars. If it is not possible to evenly distribute the

load, position it in the center or as far forward on the crossbars as

possible. Always use the adjustable tie down loops to secure the load.

To adjust the cross-bar position:

1. Loosen the thumbwheel at both ends of the cross-bar (both

cross-bars are adjustable).

2. Slide the cross-bar to the desired location.
3. Tighten the thumbwheel at both ends of the cross-bar.

To remove the cross-bar assembly from the roof rack side rails:

1. Loosen the thumbwheel at both

ends of the cross-bar (both

cross-bars are adjustable).

2. Slide the cross-bar to the end of

the rail.

3. Use a long, flat object to

depress the tongue in the

endcaps on both sides of the

cross-bar.

4. Slide the cross-bar assembly off the end of the rail.

Driver Controls

76

Detailed Information for 2002 Mazda Tribute Owners Manual

Lists of information found in 2002 Mazda Tribute Owners Manual - Page 76

  • 1. Loosen the thumbwheel at both ends of the cross-bar (both cross-bars are adjustable).
  • 2. Slide the cross-bar to the desired location.
  • 3. Tighten the thumbwheel at both ends of the cross-bar.
  • 1. Loosen the thumbwheel at both ends of the cross-bar (both cross-bars are adjustable).
  • 2. Slide the cross-bar to the end of the rail.
  • 3. Use a long, flat object to depress the tongue in the endcaps on both sides of the cross-bar.
  • 4. Slide the cross-bar assembly off the end of the rail.
  • Do not leave the liftgate or liftgate glass open while driving.