5. CONTROL PANEL OPERATION; Fig. 2-28; Ready (Paper) LED Indications- Page 37

CHAPTER 2  INSTALLATION AND BASIC OPERATION

2-13

5.  CONTROL PANEL OPERATION

There are four LEDs and a button on the control panel.  The LEDs indicate the printer status,
and pressing the button enables several functions in the printer.

Drum

Ready

Alarm

Paper

Toner

Data

Fig. 2-28

5.1

Ready (Paper) LED Indications

The Ready LED indicates the current status of the printer.

LED

Printer status

OFF

The power switch is off, or the printer is in sleep mode.

If the printer is in sleep mode, it will wake up automatically when it
receives data or when you press the control panel button.

Blinking

<Blinking at 1 second intervals>
The printer is warming up.

<Blinking at 2 seconds intervals>
The printer is cooling down and stops printing until the internal
temperature of the printer lowers.

ON

The printer is ready to print.

This LED also works as the Paper LED with the Alarm LED.  They blink simultaneously to
indicate a paper error.  See 

Subsection 2.1 ‘Operator Calls’ in CHAPTER 6

 for details.

Error

Action

Paper jam

Clear the paper jam and press the panel button if the printer
does not automatically resume printing.

No paper

Load paper in the printer and press the panel button.

Misfeed

Re-install the paper and press the panel button.

Control Panel Button

LEDs