TROUBLESHOOTING- Page 68

64

TROUBLESHOOTING

Problem

Remedy

1. The display stays blank 

after you have turned on 
the machine.

• Check that the correct AC adapter (AD-60) is 

being used and that it is connected correctly.

• If you are using alkaline batteries, check that 

they are correctly inserted.

• If the batteries are low, replace them with new 

ones.

2. The machine does not 

print or the printed char-
acters are blurred.

• Check that the correct AC adapter (AD-60) is 

being used and that it is connected correctly.

• Check that the tape cassette has been inserted 

properly.

• If the tape cassette is empty, replace it with a 

new one.

• Make sure that the back cover has been 

attached.

3. The text files that you 

stored in the memory are 
no longer there.

• If the batteries are low, replace them with new 

ones.

4. The printed characters 

are not formed properly.

• If you are using alkaline batteries, they may be 

low. Try using the AC adapter or replace the 
batteries with new ones.

• Check that the correct AC adapter (AD-60) is 

being used and that it is connected correctly.

5. A blank horizontal 

white line appears 
through the printed 
label.

• Clean the print head as explained on page 10 

and 10.

6.  Striped tape appears.

• You have reached the end of the tape. 

Replace the tape cassette with a new one.

7.  The machine has 

“locked up” (i.e., nothing 
happens when a key is 
pressed).

• Turn off the machine, and then while holding 

down 

 and 

, turn the machine back 

on. The text in the display, all format settings, 
and all text files stored in the memory are 
erased.

Code

Clear

BS