Setting Up Your Printer; Step 1; Do NOT connect the interface cable.- Page 10

8

Setting Up Your Printer

Do NOT connect the interface cable.
Connecting the interface cable is 
done when installing the driver. 

1

Open the front cover.

2

Unpack the drum unit assembly.
Remove the protective part.

3

Rock it from side to side several times to 
distribute the toner evenly inside the 
assembly.

4

Put the drum unit assembly into the printer.

5

Close the front cover of the printer.

2

Install the Drum Unit Assembly

Front cover

Protective part

Step 1

Drum unit assembly