Syntax ; Format ; PJL Syntax and Format - Page 210

2001/10/02 

CHAPTER 5 PJL - 6 

1.3. 

PJL Syntax and Format 

Syntax 

<For Example> 

@PJL ENTER LANGUAGE = emulation [<CR>]<LF> 

@PJL 

PJL Prefix 

ENTER 

Command name 

LANGUAGE 

Option name 

@PJL ENTER LANGUAGE 

Enter this portion verbatim 

[   ]  

The words in brackets [ ... ] indicates optional parameters.  You should not 
type the brackets themselves in the command. 

< .. > 

The words in < .. > indicates a control code character 

<LF> 

Required line feed 

< HT > 

Horizontal tab character (ASCII 9) 

< LF > 

Line feed character ( ASCII 10 ) 

< CR > 

Carriage Return ( ASCII 13 ) 

< SP > 

Space ( ASCII 32 ) 

< ESC > 

Escape ( ASCII 27 ) 

< FF > 

Form Feed ( ASCII 12 ) 

< WS > 

White space which consists of some < SP > 
and < HT > 

< words > 

Printable characters 

Format 

PJL commands have 4 types of formats as shown below.    

Format 1  <ESC>%-12345X 

This format is only used for the Universal Exit Language(UEL) command. 

Format 2  @PJL[<CR>]<LF> 

This format allows a PJL line without a command, and is used to break several PJL command lines visually,  to 
make it easier to see the PJL command lines. 

Format 3  @PJL command  [<words>] [<CR>] <LF> 

This format is used only for the COMMENT and ECHO commands. 

Format 4  @PJL command [command modifier : value]    

option=value[<CR>]<LF> 

This format is used for all other PJL commands. 

PJL Syntax Rules: 

PJL Syntax should be written according to the following rules. 

• 

"

@PJL

" must be uppercase.  The other words of a PJL command are not case-sensitive. 

• 

Spacing between characters consists of one or more of either the space character (ASCII 32) or the 

horizontal tab character(ASCII 9).  

• 

White space should be placed as follows, depending on the location within the command.   

w 

White space must be placed between 

@PJL

 and the PJL command name and between the PJL command 

and command modifiers.  

w 

If a white space is placed in any other place in a command, it is optional. 

w 

If a white space is not placed between two portions of a command, the command is not valid.