PCL-Specific Variables ; PostScript-Specific Variable - Page 238

2001/10/02 

CHAPTER 5 PJL - 34 

Variables 

Description 

Sample Value Range 

TIMESETMIN * 

Clock: minute setting 

0 to 59 

TIMESETSEC * 

Clock: second setting 

0 to 59 

TIMESTYLE * 

Sets the display style of the clock. 

YMD (YYYY/MM/DD hh/mm), MDY 
(MM/DD/YYYY hh/mm), DMY 
(DD/MM/YYYY hh/mm) 

SUMMERTIME * 

Clock: summer time setting 

OFF, ON 

ZONESET * 

Clock: time zone setting 

OFF, ON 

TIMEZONE * 

Clock: time setting of time zone 

-24 to +24 

NOTE: 
The variables marked * are available for HL-2400Ce and HL-3400CN only. 

2. 

PCL-Specific Variables 

The following values are PCL (HP LaserJet emulation) specific and can be set and requested using PJL. These 
variables must be set using the LPARM : PCL option. 

Variables 

Description 

Sample Value Range 

FONTSOURCE 

The valid values for FONTSOURCE 
are  

I (Internal Fonts) 

C (Cartridge Fonts) 

C1 (Card Fonts) 

S (Permanent Soft Fonts) 

If the specified value becomes 
invalid,  it is automatically changed 
to the default value. 

I, C, C1, S, 

FONTNUMBER 

Font number. This value can be 
seen on the Print Font Test selected 
from the Control Panel.  This value 
is automatically changed to the 
lowest value whenever the 
FONTSOURCE setting is changed. 

0, 1, 2, ..n 

PITCH 

Pitch of the default font in units of 
characters per inch. The pitch value 
can be specified to two decimal 
places 

0.44, 0.45,       99.99 

PTSIZE 

Height of the default font in units of 
points. The point size can be 
specified to a quarter of a point 

4.00, 4.25, .......999.75 

SYMSET 

Symbol set 

ROMAN8, ISOL1, ISOL2, ISOL5, PC8, 
PC8DN, PC850, PC852, PC8TK, WINL1, 
WINL2, WINL5, DESKTOP, PSTEXT, 
VNINTL, VNUS, MSPUBL, MATH8, 
PSMATH, VNMATH, PIFONT, LEGAL, 
ISO2, ISO4, ISO6, ISO10, ISO11, ISO 14, 
ISO15, ISO16, ISO17, ISO21, ISO 25, ISO 57, 
ISO60, ISO61, ISO69, ISO84, ISO85, WIN30, 
HPGERM, HPSPAN, MCTEXT 

3. 

PostScript-Specific Variable 

The currently defined PostScript specific variable is listed as follows. This variable can be set using the 
LPARM : POSTSCRIPT option. 

Variable 

Description 

Sample Value Range 

PRTPSERRS 

The printing of a PostScript error 
page is enabled or disabled by this 
variable 

OFF, ON