2001/10/02
CHAPTER 2 "PCL" - 19
4.1.5. Top offset registration
Esc&l#Z
(27)(38)(108)#(90)
<1Bh><26h><6Ch>#<5Ah>
# stands for the distance in decipoints (1/720") that the top edge of the logical page is to be moved.
•
Values for # may be in the range -32,767 to 32,767.
•
The distance specified is relative to the logical page’s current position.
•
# can be positive or negative. Use a positive number to move the logical page downwards on the physical
page, and a negative number to move it upwards.
4.1.6. Simplex/duplex printing (For HL-1660e/2060/3400CN/1650/1670N/3260N/2460)
Esc&
l
#S
(27)(38)(108)#(83)
<1Bh><26h><6Ch>#<53h>
# can be 0, 1, or 2.
•
# = 0 indicates Simplex printing.
•
# = 1 indicates Duplex - Long edge binding printing.
•
# = 2 indicates Duplex - Short edge binding printing.
•
If the optional duplex unit is not installed onto the printer, this mode is set to Simplex mode.
This command setting is not saved in the printer's NV-RAM.
4.1.7. Paper side selection
Esc&a#G (27)(38)(97)#(71) <1Bh><26h><61h>#<47h>
# can be 0, 1, or 2.
•
# = 0 indicates the next side. If there is a page being processed, the printer finishes the processing of that
page. If there are no pages being processed, this command is ignored.
•
# = 1 indicates the front face.
If the currently processing page is an odd page, the printer finishes the processing of that page and attaches
a dummy page.
If the odd page has already been processed onto the page and the even page has not been processed yet,
only a dummy page is attached.
If the currently processing page is an even page, the printer finishes the processing of the page.
If both an even and odd p age have been processed and the next odd page has not been processed yet, this
command is ignored.
Positive
Negative
[Long Edge Binding]
[Short Edge Binding]