Command ; Available Devices ; Description - Page 409

2001/10/02 

APPENDIX B - FLASH/ PCMCIA CARD COMMANDS - 15 

3.7 

Copy Card (For HL-1660e/2060/2400C/2400Ce/3400CN/2460/3260N Only) 

Command 

ESC CR ! 12357F 

Available Devices 

F, A 

Description 

1)  Flash memory card 

After executing a logical format on the transfer device, this command copies to the transfer device only 
when the two devices have the same memory size.  It is essential that the transfer device has already been 
formatted. 

The specify device command allows you to specify the source device. 

Specified Device 

Copy Order 

1 

Slot 2 

→

 Slot 1 

2 

Slot 1 

→

 Slot 2 

** “Slot 2 

→

 Slot 1” is the default setting. 

2)  ATA flash memory card 

After executing a logical format on the transfer device, this command copies to the transfer device file by 
file from the master device. 

If the memory runs short in the transfer device during the data transfer, the copy process is discontinued.  
Data written to the transfer device before the error is valid in the device. 

The specify device command allows you to specify the source device. 

Specified Device 

Copy Order 

1 

Slot 2 

→

 Slot 1 

2 

Slot 1 

→

 Slot 2 

** “Slot 2 

→

 Slot 1” is the default setting. 

Error 

43 CARD1 W ERROR 

43 CARD2 W ERROR 

(HL-2460 / 3260N) 

Specified Device 

Copy Order 

1 

Internal HDD 

→

 Slot 1 

2,3 

Slot 1 

→

 Internal HDD 

Note that this command cannot copy the spool data. 

Error 

43 CARD ERROR   

43 HDD ERROR