6.1.3. Set area fill identity ; Esc*c#G (27)(42)(99)#(71) - Page 92

2001/10/02

CHAPTER 2 "PCL" - 72 

For example 

Pattern

Source image

Destination image

Possible results

With transparent

pattern

With opaque

pattern

(Source image is transparent)

6.1.3.  Set area fill identity   

Esc*c#G   (27)(42)(99)#(71) 

<1Bh><2Ah><63h>#<47h> 

• 

This command sets the pattern ID of a shading tone, a fill pattern or a user-defined pattern for subsequent 

selection with the Set Pattern Type command. 

• 

# 1 ~ 100 specify the percentage of a gray scale. 

• 

# 1 ~ 6 select a fill pattern. 

• 

# 1 ~ 32767 select a user-defined pattern. 

• 

You can specify a gray scale tone from 1 to 100. To use the specified tone for shading you must then select 

one of the two gray scale pattern options with the Set Pattern Type command. 

For example 

# = 1

# = 2

# = 3

# = 4

# = 5

# = 6

Fill patterns