For Wired Network Interface Users (For Mac OS® X 10.2.4 or greater); 15 Before you install; 16 Connect the network cable- Page 26

26

Macintosh

®

Wired Network

For Wired Network Interface Users (For Mac OS

®

 X 10.2.4 or greater)

15

Before you install

a

Make sure your machine is connected to the 
power and your Macintosh

®

 is ON. You must 

be logged on with Administrator rights.

16

Connect the network 

cable

a

Lift the scanner cover until it locks securely into 
the open position.

b

Connect the network cable to the LAN socket 
marked with a 

 symbol. You will find the 

LAN socket inside the machine on the left as 
shown below.

c

Carefully route the network cable through the 
trench and out the back of the machine.Then, 
connect the cable to your network.

d

Lift the scanner cover to release the lock

a

.

Gently push the scanner cover support 
down

b

 and close the scanner cover

c

 using 

both hands. 

Important

• For Mac OS

®

 X 10.2.0 to 10.2.3 users, 

upgrade to Mac OS

®

 X 10.2.4 or greater. (For 

the latest information for Mac OS

®

 X, visit 

http://solutions.brother.com/)

• Make sure there are no memory cards or a 

USB Flash memory drive inserted.

LAN

USB

Important

Make sure that the cable does not restrict the 
cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, 
guide both cables through the trench with one on 
top of the other.

2

3

1